Live Pen™ 1 vs. Live Pen™ 2

  Live Pen™ 1 Live Pen™ 2
Power On/Off Cap Capacitive Touch and Pressure sensor
Camera activation 990 ms 15 ms
Frame rate 75 FPS 75 FPS
Memory 2 MB 4 MB
Capacity
Typically up-to 40 fully written A4 pages. Up to 500 unique pages Typically 80 pages of A4 with no limitation when it comes to the number of unique pages
Battery Rechargable lithium-ion Rechargable lithium polymer
Shelf life Approx. 1-2 years Approx. 7 months whilst in shipping mode
Stand-by Up to 10 hours Up to 1.5 months
Operating Up to 2 hours Up to 8 hours
Charging Approx. 2.5 hours Up to 2.5 hours
Maximum number of charging cycles Typically 1000 charges The capacity will be reduced to 80% after 500 charging cycles
USB USB 2.0 USB 2.0
USB-transfer One transfer at a time. Up to 8 pens connected simultaneously. One transfer at a time. Up to 8 pens connected simultaneously.
USB charging power Approximately 126 mA 175 mA
External charging power
Approximately slightly less than 100 mA to meet the USB standard 90 mA
External charger requirements Must be able to output 500mA at 5V 5V DC / 300mA
Bluetooth Bluetooth 1.2 Bluetooth 4 (Bluetooth Smart Ready)
Bluetooth Security PIN pairing Simple Secure Pairing only (as of FW 1.3.2.2)
Bluetooth transfer One transfer at a time One transfer at a time
Strokes Transfer Page, Book or All All strokes
Pidget support See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details. Pairing pidget initiates pairing. All send pidgets result in an attempt to connect to send data given that Bluetooth is enabled and the pen has been paired. See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details.
Template support See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details. See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details.
Unsupported paper Buzz / power off Buzz
Encryption Support Only encrypted segments With FW 1.4, the pen encrypts all or nothing depending on configuration
Encryption Level AES2048/RSA1024 AES256/RSA2048 (no signing)
Encrypted pattern See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details. See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details.
Segment support See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details. See Paper Template Descriptions (https://support.anoto.com/hc/en-us/articles/203901736) for details.
Dimensions with cap(s) 157 x 21 x 18 mm / 6.18 x 0.825 x 0.708 in 182 mm x 16.4 mm / 7.165 x 0.646 in
Weight with cap(s)
32 g = 1.13 oz 41 gr = 1.45 oz
Ink-refill ISO 12757-2 D M / JIS S 6039 ISO 12757-2 D M / JIS S 6039
Operating temperatures 0° C to 40° C / 32° F to 194° F 0° C to 40° C / 32° F to 194° F
MMI LEDs + haptic feedback OLED MMI display + haptic feedback
Clock Offset from EPOCH (Jan 1, 1970) UTC time
Ink Stroke Container PGC STF2
Reset

Reset: by pushing reset button on pen

Master reset: reset button plus presure on nib

Reset: Pen gets reset every time it is put back in the craddle

Master reset: via penDirector, under Pen settings tab. Push Factory reset button.

 


Last Updated: 2016-09-22 13:54:03 UTC
Powered by Zendesk